Unconventional – Tactical | Providing combat uniform, soft gear & outdoor clothing modifications for the tactical operator and well-informed citizen

ORDER PROCESS & WASH/DRY INSTRUCTIONS OF CONVERTED OR MODIFIED UNIFORMS

Posted on May 11, 2012 by Unconventional - Tactical

For all order inquiries and questions, contact me at unctac@yahoo.com

ORDERING

After you contact me at the above e-mail address, I will contact you about your inquiry and go over all relevant details with you on the process, as well as send you a PENDING QUOTE and FINALIZED QUOTE after you have decided on what you want done. Generally, people send their field uniform or tactical uniform items to me…or buy and forward/ship their items to me and then I do the work on them and return the items to the person/clients, upon completion of the project/projects. If a person wishes for me to supply the uniform items, I will locate several of the requested items (used in good condition, like new, or new) at various prices and then contact the person with the items I have sourced for them. They can then choose which items they want based on their budget or on what they are willing to spend. Most of the time I can find the items at decent prices as I am very thorough with my item searches. Active duty military and LE personnel, PMC’s, PSD, EMS/SAR, Executive Protection (PSS’s), often request me to acquire the items for them since, quite often, they are over-seas, on deployment, on assignment..etc, or are not in a position to acquire the items themselves.

All return shipping is done via USPS Priority or Priority Flat Rate shipping with tracking number provided where tracking numbers can be used based on USPS policy. Over-seas USPS Priority/Priority Flat Rate shipping to APO/FPO addresses and most international addresses do not include tracking numbers, via USPS policy, however extra insurance can be had if the person wants to pay for that service. I’ve never had a problem yet, with any of my shipments to any location using USPS as my shipping service. I do not use any other shipping method at this time. For small items like call sign patches..etc, I do use standard shipping via USPS, as well as USPS Priority shipping, using letter envelopes, small Scotch paper bubble packets and other small yellow stationary envelopes..etc. All shipping costs are included in the FINALIZED QUOTES.

WHAT HAPPENS AFTER YOUR ORDER IS COMPLETED

After updating you, via e-mail, on the order process from time to time, and upon completion of your project, I will then notify you that your project has been completed and is ready for shipment. In general, I will not ship the package to you until I receive confirmation that you are OK with me shipping your parcel out to you at the address you gave to me at the beginning of the order process. This insures that the items are shipped to the address you want them shipped to …and/or they are shipped to a location where I know you (or your trustworthy friend/family member..etc) will be at to receive the items. Communication is thorough and everybody wins…you get your items back in your hands and I’m not stressed wondering if you are going to receive your items back. People change addresses or move..etc and sometimes forget to tell me. Also, If there is any balance due, I will remind you of the balance due and let you know that your items are packaged and ready to go…I will continue to notify you via all e-mail addresses that you have given to me in an effort to reach you about your completed order and any balance due. If you are active military, LE, PMC or medical personnel, I will hang onto your completed project for up to a year from the date of the last message I sent to you and then if no response is made by you in that time-frame, I’ll either use the items as fabric for other projects or sell the items off.

If you are not military personnel, LE personnel, PMC personnel or medical personnel and I do not hear back from you after 30 days have passed from the last notification I sent to you, the items/conversions may be listed for sale or kept for use as remnants. The exception to this is if you have told me in the beginning, that you may need me to hold onto your items after the order is completed… for whatever time period you need for whatever reason.

I will exhaust all efforts trying to contact you, first, to notify you that your order is complete and ready to be shipped out to you, before I sell the items or use them as remnants for other projects.

DELAYS ON COMPLETION OF PROJECTS AND/OR CIRCUMSTANCES THAT MAY COME UP THAT PREVENT ME FROM COMPLETING PROJECTS IN A TIMELY MANNER

I strive to complete orders in a timely manner and can usually get them done and shipped out in a decent amount of time. However, from time to time, due to unusual circumstances (my supplies source is back-ordered on the needed supplies, family urgency needs, power outages or equipment maintenance intervals, etc) and during heavy seasons, some orders may take longer than usual to complete. This is a specialized service where everything is hand-made and installed. This is not a production line service. I started this in order to help those who defend our freedoms do their jobs better and to allow for a myriad of options based on their needs, not on what a manufacturer “thinks” they need. It is not unheard to hear from a person who states they are willing to wait for long periods of time to receive their projects back because of they are aware of the demand that this service takes on…however, this is not the norm and it is certainly not what I prefer if I can help it. Generally, as a one-man-show, projects will be completed and shipped out in approximately a month or so…but usually less if the project is a simple one and not time consuming or detail oriented. I’m getting better at shorter turn-around times as time progresses. Generally, I require full payment up front, however, if I feel that a project may take me longer then expected, I may hold on taking payment so that a person is not out the dough, while waiting a long time for their project to be completed.

WASH/DRY AND CARE INSTRUCTIONS FOR YOUR MODIFIED/CONVERTED UNIFORM

To prevent premature wear/age and fading of your Field/Combat Hybrid uniform tops and bottoms, wash them by hand in a bath tub, plastic bin or shower…etc with a MILD soap detergent, rinse with cold water very thoroughly and then place/clip item on a plastic or non-metallic hanger and hang dry the item where it can breathe and dry more quickly. If hanging item outside, be sure it is not in direct sunlight. If out in direct sunlight to speed up the drying time…don’t leave the item in sunlight the entire dry time.

If you absolutely must use an electric washer and dryer…do the following…wash the item in a washer using the “gentle cycle/delicate” or “hand wash” position. When item is finished being washed, place item in dryer and dry item on the “low heat/delicate” position for a limited time setting and check on the items dryness every 5-1o minutes so that the item/items do not get unnecessary over-heating.

NOTE:

100% cotton rip-stop, Twill and other non-nylon incorporated fabrics are more vulnerable to wear and age than Nylon/Cotton (NY-CO) rip-stop fabrics…so be even more careful with the wash and dry process of those items.

Posted in REVIEWS | 1 Comment

ORDER UPDATES & CUSTOMER PHOTOS

Posted on August 8, 2011 by Unconventional - Tactical

IN-PROCESS ORDER STATUS UPDATES

* not shown in order of process…

J. O’Connell (US) 1 item – 50% completed

M. Depree (US) – 1/2 completed

A. Mook (GERMANY) 2 items – in-process

A. Brougham (US gvmnt) 5 items

J. Mullins (US military) 2 items

C. Rutherford (Canada) 1 item

T. Tisdale (US) 2 items

M. Peters (Canada) 2 items

X. St. Ours (Canada) 2 items

N. Hardy (US) 1 item

M. Jones (US) 1 item

A. Verdoliva (US) 1 item

D. Winborne (US) 1 item

J. Murray (US) 2 items

I. Domingo (US) 2 items

A. Whadwani (US) 1 item

C. Kalish (US) 2 items

C. Rector (US) 1 item

M. Greider (US) 6 items

–

2015 COMPLETES

A. Vega (US) 1 item – 09/13/15

A. Tan (US) 1 item repair – 08/20/15

B. Fuller (US) 1 item – 08/02/15

J. Parsons (US) 2 items – 07/17/15

G. Pickens (US) 2 items – 06/19/15

G. Smith (US) 4 items – 06/11/15

D. Guvernator (US) 1 items – 05/27/15

T. Dubois (US) 1 item – 05/25/15

L. Nelson (US) 3 items – 05/13/15 – 05/22/15

M. Reese Order #2 (US LE) 1 item – 05/19/15

J. Moses Order #6 (US military) 1 item – 05/10/15

M. Reese Order #1 (US LE) 1 item – 05/01/15

C. Robbins (US) 3 items – 04/24/15

K. Fazzone (US military) 2 items – 04/20/15

W. Pease (US) 1 item – 04/03/15

R. Grady (UK) 1 item – 04/01/15

J. Moses (US Military) 1 item – COMPLETED 03/24/15

B. Ayres (US) 1 item – 03/20/15

G. Allen (USMC) 2 items – 03/12/15

T. Shaughnessy (US) 1 item – 03/11/15

Z. Kier (US military) 1 item

M. Kunz (US military) 2 items – 02/13/15

E. Williams (US LE) 3 items – 02/04/15

M. Cernobyl (US) 1 item – 01/30/15

C. Paccioretti (US) 1 item – 01/16/15

G. Allen (US military) 4 items – 01/07/15

2014 COMPLETES:

J. Schaefer (US) 3 items – 12/29/14J. Peterkin (Canadian military) 1 item – 12/08/14T. Colburn (US military) 3 items – 11/17/14R. Powell (UK) – 09/02/14 (shipped 11/17/14)C. Choate (US) 1 item – 10/31/14A. BRANNAN (US) 3 items – 10/17/14B. Machado (US) 1 item – 10/07/14A. Wingate (US) 5 items – 10/02/14J. Moses (US) 1 item – 09/15/14D. Dorris (US) 2 items – 09/08/14A. Williams (US) 1 item – 08/27/14J. Moses (US) 1 item – 08/26/14V. Bruno (US) 1 item – 08/18/14M. Hrobuchak (US) 2 items – 08/13/14D. Grigartis (US) 2 items – 08/12/14W. Krajenke (US) 4 items – 08/06/14

J. Woolley (US) 2 items – 07/30/14

R. Embury (US) 1 item – 07/24/14

R. Villarreal (US) 1 item – 07/23/14

J. Hamburger (US) 1 item – 07/21/14

W. Johnson (US) 2 items – 07/15/14

B. Christiansen (US) 1 item – 07/02/14

S. Olsen (US) 2 items – 07/01/14

D. Skinner (UK) 2 items – 05/22/14 (SHIPPED OUT 06/27/14 via USPS Priority International Express shipping…estimated time of arrival is Thursday, July 3, 2014)

C. Wofford (US) 3 items – 06/18/14

T. Wynne (US) 1 item – 06/09/14

A. Thurman (US) 2 items – 06/04/14/ –

M. Hafley (US) 1 item – 05/27/14

B. Caron 1 item – 05/21/14

L. Nelson #2 1 item – 05/20/14

A. Thee (US) 1 item – 05/15/14

A. Brannan ORDER #1 (US) 4 items – 05/14/14

J. Young (US) 2 items – 05/10/14

A. Hoang (US) 2 items – 04/24/14

A. Hewitt (US) 2 items – 04/21/14

D. Hutton (US) 1 item – 04/15/14

A. Wingate (US) 2 items – 04/11/14

J. Bishop (US) 2 items – 04/03/14

B. Shum (US) 2 items – 03/31/14

T. Piconke (US) 2 items – 03/26/14

J. Moses (US) 1 item – 03/12/14

R. Francis (APO) 2 items – 03/05/14

A. Marquez (US) 2 items – 02/27/14

J. Hungate (US) 1 item – 02/17/14

A. Tan (US) 3 items – 02/11/14

E. Cudzillo (US) 1 item – 01/01/14

M. Shelton (US) 4 items – 01/14/14

–

2013 COMPLETES

A. Pawloski (US) 2 items – 12/09/13

M. Bell (APO) 1 item – 11/07/2013

92 people reached

P. Oertyl (US) 2 items – completed 10/23/13

J. Solano (US) 1 item – completed 10/16/13

J. Henderson (UK) – completed

M. Shum (US) 1 item completed

J. Gober (US) 3 items completed 10/02/13

J. Milam (US/LE) 2cnd half of items completed – 09/11/13

M. Ritter (APO) 2 items completed – 09/13

J. Moses (US) 2cnd items completed 08/22/13

T. Sterling (US) – 2 items completed 08/07/13

P. Abney (US/APO) – 1 item completed 07/16/13

J. Moses (US) – 2cnd item completed 06/26/13

M. Jankovsky (US) – 4 items completed 06/17/13

J. Barrett (APO) – completed 06/10/13

A. Marquez (US) – completed 06/02/13

—

The following photos are from past and current customers who have ordered custom uniform and/or call sign services:

The REAL deal !

5 custom pants conversions currently in-progress

–

G. Allen – 01/07/15

Custom RAID mods to Woodland MARPAT and M81 Woodland tops

Pants hemming also completed

M. Hafley CUSTOM EFCHP PANTS CONVERSION TO DCU PANTS 062014

M. Hafley (Custom Order June, 2014) E-FCHP/SOF Battle pants conversion to DCU pants – add front RAID pockets – add extra mini-pocket on top left thigh utility pocket – install internal knee pad height adjusters inside front thigh pockets – – add widened rear waist belt loop with end-loop

–

CP Gen 2 Field Pants with CP Combat additions – 02/24/13

–

Custom made G3/AC/RAID/E-FCHP combo DCU Pants Conversion for US Army service member 06/2012

–

Custom made G3/AC/RAID/E-FCHP combo DCU Pants Conversion for US Army service member 06/2012

–

N. Day wearing a woodland/M81 MARSOC uniform variation for his MARSOC impression for MIL-SIM…and his team mate B. Lobo wearing a set of FCHP converted woodland M81’s (custom orders, take more time to complete and general pricing has not been set yet for these conversions) 01/07/12

–

N. Day wearing a converted desert MARPAT FROG uniform…an enhanced uniform variation for his AOR1 NSW/SEAL Impression for MIL-SIM (custom orders, take more time to complete and general pricing has not been set yet for these conversions) 11/2011

–

Dan …an active military service member wearing an FCHP pants conversion, a RAID modified woodland camo uniform shirt & combat knee pads at a MIL-SIM event in the Pacific North-West, 06/2011)

Nick Day’s Air Force CCT Impression with his FCHP modified ABU pants

2013

MILSIM enthusiast (German KSK impression)

Order:

E-FCHP/SOF Battle pants connversion to Temperate Flecktarn issue pants

FCHS/SOF combat shirt conversion to Temperate Flecktarn issue shirt

– make arm pockets/flaps/velcro CP-AC shape

Another customer from the Pacific North-West MIL-SIM scene wearing a pair of extremely modified Swiss Alpen pants (look closely at the pants and you’ll see a myriad of different modifications that were done) – 01/2011

Posted in REVIEWS | 1 Comment

CUSTOM MADE CALL SIGN, BLOOD TYPE & CALL SIGN/BLOOD TYPE COMBO GLOW PATCHES

Posted on November 20, 2010 by Unconventional - Tactical

LUMINESCENT GLOW CALL SIGN PATCHES, BLOOD TYPE PATCHES & CALL SIGN/BLOOD TYPE PATCHES

Standard (non-IR) luminescent glow call sign/blood type, call sign only and blood type only velcro backed patches can be made with various color combinations or with solid color foundations. Size dimensions start out at approximately 2 1/2″ high by 3 3/4″ wide for patches with hook velcro borders… and approximately 3″ high by 4″ wide for patches with loop velcro borders. If patches are ordered with loop velcro borders, the patches will can retain 3/4″ or 1″ IR squares..etc if the user wishes to use those devices. See patch options and pricing near the bottom of this page.

Call sign order for USAREUR 7A (10/2012)

ODA 1316 Call Sign/Blood Type order 11/17/11

: Order request from a SOTF entity…Call Sign/Blood Type Patches with khaki/tan velcro loop borders 09/26/11

Call Sign/Blood Type Patches with tan velcro loop borders 09/27/11

Demo photo for Call Sign/Blood Type Patches with tan velcro loop borders 09/27/11

Adventure – Tactical Call Sign/Blood Type Patch w/smoke green frame strips on woodland camo RAID top

MILSIM Team order (2012)

MILSIM Team (04/2012)

CALL SIGN/BLOOD TYPE PATCH (sample shown in the dark)

CALL SIGN/BLOOD TYPE & CALL SIGN PATCH (samples shown in the light)

CALL SIGN PATCH (sample shown in the dark)

OD Call Signs with OD HOOK VELCRO BORDERS sample 06/09/11

OD Call Sign/Blood Type patch with OD LOOP VELCRO BORDERS sample 04/25/11

Call Sign/Blood Type patch in dark (glow sample)

Call Sign/Blood Type patch with KHAKI/TAN HOOK VELCRO BORDERS border 11/2010

Air Force customer call signs

Green based (dark OD green/Smoke Green) call signs

Call Sign/Blood Type Combo Patch, Call Sign & Blood Type Patch (glow only)

The patches measure 2 1/2″ high by 3 3/4″ long and the design of these patches incorporate sewn-on velcro loop (fuzzy portion of velcro) or velcro hook (hook portion of velcro) borders on the front of each patch. Optional color choices for the patch borders are available in coyote, coyote tan, khaki/tan, olive drab, foliage green or black. They can be in velcro loop or velcro hook. Colored velcro frame strips helps with keeping the call sign patches “low vis” for field/woodland/jungle/desert operations and/or to better match up to the users uniform type based on the type of mission that will be conducted. The background on the front of the patch behind the lettering/numbering..etc is in black. The lettering/numbering characters are in a light greenish/yellow glow color and glow for a certain period of time if a light is shined on the patch.

–

CALL SIGN OPTION A (CQB)

* With BLACK VELCRO COLOR ONLY

* black hook velcro front borders and black hook velcro backing

If OPTION A is chosen you will receive the call sign, call sign with blood type or blood type (your choice) patch with standard black colored velcro hook borders on the front and standard black colored hook velcro covering the back of the patch to allow the patch to be flipped over (all of back portion of patch will be black hook velcro)

* BLACK hook velcro only

–

CALL SIGN OPTION B (CQB ENHANCED)

* with color velcro option

(COYOTE, COYOTE TAN, KHAKI/TAN, OLIVE DRAB, FOLIAGE GREEN or BLACK)

* loop velcro front borders with hook velcro backing

If OPTION B is chosen, you will receive the calls sign, call sign with blood type or blood type (your choice) with velcro loop (“fuzzy” portion of velcro) on the front edges of the call sign/call signs to allow for placement of 3/4″ – 1″ IR squares or other info to be placed onto the call sign borders. However, the call sign can not be flipped over and attached for “Recce”, stalking…etc and/or covert operations, because it will have loop velcro on the front of the call sign borders. The loop velcro option call sign patches are useful in both URBAN/CQB and other environments and missions because these patches are generally designed for high visibility team member identification. Different colored front loop velcro borders can still be chosen as an option if the user or team wants the patch to match up to their uniform but not “disappear” into the uniform..so it can still be visible enough for team members to read.

* choose one of the following velcro loop colors…COYOTE, COYOTE TAN, KHAKI/TAN, OLIVE DRAB, FOLIAGE GREEN or BLACK

–

CALL SIGN OPTION C (RECCE)

* with color velcro option

(COYOTE, COYOTE TAN, KHAKI/TAN, OLIVE DRAB, FOLIAGE GREEN or BLACK)

* hook velcro front borders & hook velcro backing

If OPTION C is chosen you will receive the call sign, call sign with blood type or blood type patch (your choice) with velcro hook front borders and velcro hook backing that allows the patch to be flipped over for “Recce..etc operations and/or if the user simply does not need the call sign or blood type to be visible for a particular mission or training exercise..etc. When the patches are flipped over, your choice of color hook velcro will cover the entire backing of the patch

—

CALL SIGN/BLOOD TYPE PATCH PRICING FOR ALL BLACK BORDERS & BACKING CALL SIGN PATCHES ONLY:

$26 shipped (US & US APO shipping only) for 1 call sign/ blood type patch, call sign only patch or blood type only patch (your choice of most characters/numbers variations) with black colored hook or loop velcro on the front borders and back of patch

$39 shipped (US & US APO shipping only) for 2 call sign/ blood type patches, call sign only patch or blood type only patch (your choice of most characters/numbers variations) with black colored hook or loop velcro on the front borders and back of patch

$49 shipped (US & US APO shipping only) for 3 call sign/ blood type patches, call sign only patch or blood type only patch (your choice of most characters/numbers variations) with black loop velcro on front borders of patch

$59 shipped (US & US APO shipping only) for a set of 4 call sign/ blood type patches, call sign only patch or blood type only patch (your choice of most characters/numbers variations) with black hook or loop velcro on front borders and back of patch

* Just add $13.00 for each additional patch if more than four patches are needed

* add $6.00 per patch for optional colored velcro loop (“fuzzy” type velcro) front borders (OPTION A patches)

* add $6.00 per patch for optional colored velcro hook (male type velcro) front borders and backing attachment (OPTION C patches)

* Contact me at unctac@yahoo.comfor any questions and for bulk order pricing

* Accepted forms of payment are Pay Pal or Money Orders (payment must clear first before orders are started), contact me first at adtactical@yahoo.com first, to discuss how you would like the characters on your patches to be displayed…etc. I will then issue you an invoice via Pay Pal or send you an invoice via e-mail if you’re paying by Money Order for the order/orders you that you have requested

* Discount rates may be applied for bulk orders…contact me at unctac@yahoo.com for details

* Discount rates may be applied for bulk orders…we can discuss that option

* Send order requests and correspondence to adtactical@yahoo.com

Posted in REVIEWS | Leave a comment

UNIFORM MODIFICATION SERVICES – E-FCHP, FCHP, FCHS & RAID

Posted on November 20, 2010 by Unconventional - Tactical

UNCONVENTIONAL UNIFORM MODIFICATIONS/CONVERSIONS

–

For your project requests, contact me at unctac@yahoo.com

–

Intro:

The idea behind my innovations is to provide a lower cost alternative for those who want/need a customizable “combat” uniform or combat shirt or pants… that is functional, allows fitment of various brands of insertable hard-cap combat knee pads and/or hard-cap elbow pads and is adjustable. Furthermore, the person is not limited to just a few types of camo or color options as found through major retailers…they can have just about any uniform modified based on the streamlined options I provide or via a custom configuration per the users request. The most common project requests are for modifications to a persons (or teams) military issue field uniforms (current issue or other type), as well as other types of tactical pants or shirts, such as international camo pattern uniforms or flat color based tactical clothing…which are converted into E-FCHP’s (Enhanced Field/Combat Hybrid Pants), FCHP’s ( Field/Combat Hybrid Pants) and FCHS (Field Combat/Hybrid Shirt) shirts. None of my conversions or modifications are copy’s of name brand designs. They may have similar features that the name brand designs have but are, in no way, copy’s of other peoples/companies designs. I also offer repair, additions and/or modifications to existing (in-service) law enforcement tactical uniforms and issue conventional military and military SOF uniforms and soft gear

* The uniforms and kit shown in the photos on this page and in this blog are for demonstration purposes only and are not meant to portray an accurate representation of any US or foreign military, LE, EMS or PMC entity * Any and all knee pads, elbow pads, riggers belts, chem sticks and other items shown in the photos are not included in the conversions/modifications and are for demo purposes only, however, I can source particular items at an additional cost, at reasonable prices, if you need them.

–

I OFFER SIX VERSIONS OF PANTS CONVERSIONS:

–

E-FCHP PATRIOT (military, LE, EMS/SAR, PMC’s only !)

* This pants conversion is specifically for law enforcement, military, EMS, SAR and PMC personnel only and is generally for those who are donning specific items on their person for dynamic entry, EOD, recon or other specific/unusual operations. …see SWAT/SRT page for sample of a past SWAT team order * the options will be discussed privately, via my paid for, private e-mail. E-mail me first, at unctac@yahoo.com if interested in the E-FCHP Patriot pants conversion. When I receive an e-mail from you regarding the E-FCHP Patriot pants conversion…I will then contact you through my more secure, private, paid for e-mail address and discuss what your needs are regarding what custom additions you would like done to your pants..etc. After the options and features are discussed and you have decided on what you want, I will then send you a Pending Quote that will reflect the modifications/additions you want, pricing, shipping cost, payment methods and shipping/receiving etc.

E-FCHP Pie Slicer (available for military, LE, EMS/SAR and civilians)

E-FCHP Battle (available for military, LE, EMS/SAR and civilians)

E-FCHP (available for military, LE. EMS/SAR and civilians)

FCHP PMC (available for military, LE, EMS/SAR and civilians)

FCHP SAR (available for military, LE, EMS/SAR and civilians)

The E-FCHP Patriot, E-FCHP PIE SLICER, E-FCHP BATTLE, E-FCHP, FCHP PMC and FCHP SAR pants conversions all include the installation of combat knee pad pockets to allow use of various brands of “Combat” knee pads…where the soft cushion portion of the pad goes underneath the pad pocket openings and the hard cap portion of the pad goes on the outside of the pad opening. When ordering, you do not need to send me your combat knee pads, combat elbow pads… or any variation thereof, as I have my own templates that are used to make the pad pockets..etc. * –

MIITARY, PMC, LE/SAR OR CIVILIAN PANTS MODIFICATIONS ORDERS:

$98 – E-FCHP PIE SLICER pants conversion

* price based on person supplying their own pants

* if I do not have extra matching material on hand at the time of the order, person ordering will need to supply me with matching fabric to make the modification pieces… OR the fabric can be ordered at an extra cost based on the camo type/pattern or flat color base and material it is) CONVERSION INCLUDES:

– All necessary matching velcro included

– Make and install combat knee pad pockets with loop velcro attachment points and double-triple stitch outlines

– making of and installation of upper/front utility pockets (RAID pockets installed on top of existing hand pockets)

– making of and installation of Small utility pockets onto upper/mid-front of pant legs, just above top of knee pad pocket (ie: thigh pockets)

– making of and installation of calf pockets

– Reinforced loop velcro knee pad hole edges – Internal knee pad height adjusters (1″ matching nylon webbing/1″ matching loop-lock buckles)

– Folded/angled lower cargo pocket corners (if necessary to allow extra space for knee pad pocket installation)

– Outer mid-pant leg velcro adjustment straps

– Ankle pant leg velcro adjustment straps

– 2 over-sized front D-ring/belt loops added to front of pants waist-line using 1″ matching nylon webbing or matching camo material (same as pants material)

Also includes your choice of one of the following options:

Addition of a WBP (available only for military, LE, EMS/SAR & PMC personnel) OR.. Addition of gaiter loops to sides of each pant leg base (these are good to have for air crew members or for those who may/do operate in forest/back-country environments)

Additional available options by request:

Add $12 – for matching matching color stretch panel installed at groin area

Add $12 – for matching color 1″ – 1 1/2″ wide side elastic stretch waist adjusters with velcro retainers

Add $2 (each) – for addition of extra widened D-ring belt loop

Add $10 – 2 small pistol mag pockets added to front of pants (1 next to left hand pocket, 1 next to right hand pocket)

Add $10 – for removal of buttons on pants and installation of color coordinated velcro hook and loop strips on pants at all pocket closures on pants (if customer supplies velcro)

Add $15 – for removal of buttons on pants and installation of color coordinated velcro hook and loop strips on pants at all pocket closures on pants (if I supply velcro)

Add $25 – for replica CP AirFlex combat knee pads (KHAKI, Dark OD GREEN or BLACK)

Add $45 – for genuine CP AirFlex combat knee pads (KHAKI, OD GREEN or BLACK)

Add Add $ ? – for various custom features you wish to have added to the project (contact me to discuss what you need done) * pricing may be more if a custom configuration is requested based on position/location of pocket placement and type of fabric being used

–

$78 – E-FCHP BATTLE pants conversion (each)

* price based on person supplying their own pants

* if I do not have extra matching material on hand at the time of the order, person ordering will need to supply me with the matching material to make the pad pockets and other pieces… OR the material/fabric can be ordered at an extra cost based on the camo type and material it is)

CONVERSION INCLUDES:

– All necessary matching velcro included

– Make and attach combat knee pad pockets with loop attachment velcro and double stitch outlines
– Reinforced loop velcro knee pad hole edges

– Internal knee pad height adjusters (1″ matching nylon webbing/1″ matching loop-lock buckles)

– Folded/angled lower cargo pocket corners (if necessary) – Outer mid-pant leg velcro adjustment straps

– Ankle pant leg velcro adjustment straps

– Utility pockets made and installed onto upper/front of pant legs, just above top of knee pad pocket

– 1 front over-sized D-ring/belt loop added to front of pants waist-line using 1″ matching nylon webbing or matching camo material (same as pants material)

* YOU WILL NEED TO LET ME KNOW WHETHER YOU ARE A RIGHT HAND SHOOTER OR A LEFT HAND SHOOTER…D-RING/BELT LOOP WILL BE PLACED ON FRONT LEFT WAIST IF RIGHT HAND SHOOTER…D-RING/BELT LOOP WILL BE PLACED ON RIGHT FRONT WAIST IF LEFT HAND SHOOTER

Additional available options by request:

Add $12 – for RAID pockets added/stacked on top of both front hand pockets

Add $8 – for calf pockets added

Add $8 – for addition of a WBP (available only for military, LE & PMC or PSS personnel)

Add $8 – for addition of gaiter loops to sides of each pant leg base

Add $2 – for addition of an extra over-sized front or rear D-ring belt loop

Add $10 – 2 small pistol mag/multi-tool pockets added to front of pants (1 next to left hand pocket, 1 next to right hand pocket)

Add $12 – for matching color stretch panel installed at groin area

Add $12 – for matching color 1″ – 1 1/2″ wide side elastic stretch waist adjusters with velcro retainers

Add $10 – for removal of buttons on pants and installation of color coordinated velcro hook and loop strips on pants at all pocket closures on pants (if customer supplies velcro)

Add $15 – for removal of buttons on pants and installation of color coordinated velcro hook and loop strips on pants at all pocket closures on pants (if I supply velcro)

Add $25 – for replica CP AirFlex combat knee pads (KHAKI, Dark OD GREEN or BLACK)

Add $45 – for genuine CP AirFlex combat knee pads (KHAKI, OD GREEN or BLACK) Add

$ ? – for various custom features you wish to have added to the project (contact me to discuss what you need done) * pricing may be more if a custom configuration is requested based on position/location of pocket placement and type of fabric being used

–

$68 – E-FCHP pants conversion (each)

* pants supplied by person ordering

* if I do not have extra matching material on hand at the time of the order, person ordering will need to supply me with the material to make the pad pockets or material/fabric can be ordered at an extra cost based on the camo type and material it is) CONVERSION INCLUDES:

– All necessary matching velcro included

– Make and attach combat knee pad pockets with loop attachment velcro retainers and double stitch outlines

– Reinforced loop velcro knee pad hole edges – Internal knee pad height adjusters (1″ matching nylon webbing/1″ matching loop-lock buckles)

– Folded/angled lower cargo pocket corners (if necessary)

– Outer mid-pant leg velcro adjustment straps

– Ankle pant leg velcro adjustment straps – installation of pant leg base gaiter loops (to keep pant legs from riding up when in dense forest/jungle or in a low-crawl/prone position)

* no making and installation of upper front/center utility pant leg pockets

Additional available options:

Add $25 – for replica CP AirFlex combat knee pads (KHAKI, Dark OD GREEN or BLACK)

Add $45 – for genuine CP AirFlex combat knee pads (KHAKI, OD GREEN or BLACK) * price may actually be lower depending on my sources

–

$48 – FCHP PMC pants conversion (each)

* price based on person supplying their own pants

The “PMC” conversion is primarily designed for limited to intermittent threat environments, such as what is encountered in PSD/PSS deployments and/or short-term engagements that are sometimes common with force protection details, executive protection details..etc..etc.

* if you are sending non-camo pattern pants, you will need to supply me with extra fabric that matches your pants if I don’t currently have the correct fabric…or I can source the fabric through my supplier if they have the color in stock/available

Includes the making and installation of combat knee pad pockets with matching velcro retainers

Includes the installation of matching velcro adjustment straps at outer sides of each knee to adjust centering of each knee pad

Includes a WBP (this feature is added ONLY for military, LE, PMC or PSS personnel…I will not install this feature if you can not/will not provide proof of military, LE, EMS, SAR, PMC or PSS service to me, via ID or other form of proof…..I’ll use my own discretion on a case by case basis if ID or other form of proof can not be supplied)

Additional available options:

Add $25 – for replica CP AirFlex combat knee pads (KHAKI, Dark OD GREEN or BLACK)

Add $45 – for genuine CP AirFlex combat knee pads (KHAKI, OD GREEN or BLACK)

–

$48 – FCHP SAR pants conversion (each)

* price based on person supplying their own pants

Includes the making and installation of combat knee pad pockets with matching velcro retainers

Includes the installation of matching velcro adjustment straps at outer sides of each knee to adjust centering of each knee pad

Includes installation of matching 1″ nylon webbing gaiter loops at both sides of pant legs (for air crew personnel..etc)

Additional available options:

Add $25 – for replica CP AirFlex combat knee pads (KHAKI, Dark OD GREEN or BLACK)

Add $45 – for genuine CP AirFlex combat knee pads (KHAKI, OD GREEN or BLACK)

* NOTE…all FCHP and E-FCHP pants conversions may have slight variations in stitch patterns or locations of stitching due to each pant being different in design from others

–

$ – Detective (TACTICAL) pants conversion

* price based on person supplying their own pants

** COMING SOON **

–

$ – Detective (UC-AW) pants conversion

* price based on person supplying their own pants

** COMING SOON **

–

$ – Detective (UC) pants conversion

* price based on person supplying their own pants

** COMING SOON **

–

MIITARY, PMC, LE OR CIVILIAN SHIRT MODIFICATIONS ORDERS:

$45.00 – Basic FCHS (combat shirt) conversion

* price based on you supplying your own Uniform Shirt, Base T-shirt and 4″ velcro

Person ordering sends me their field shirt and loose fit moisture-wicking shirt that has arm/shoulder pockets and velcro already on the shirt for the conversion. Includes the removal of the torso area of your field shirt and the installation/attachment of your moisture-control base T- shirt to your field shirt . Arm pit cut-outs will be made on the field shirt to allow for the stretch or loose-fit shirt arm pit area to be sewn onto the field shirt (very similar to Crye’s Combat shirt and other brand combat shirts). The top-of-shoulder portion of your field shirt will be left in-tact for the upper shoulder areas of your combat shirt. A short neck zipper is included. Everything else on the original field shirt/shirt sleeves is left as it was when it was received.

Add $14 – if you prefer me to supply the color coordinating moisture control base T-shirt for the conversion

Add $6 – if I supply the velcro

* Add $15 if no pockets are on the field shirt you are sending in and arm/shoulder pockets w/velcro need to be made from scratch and installed onto FCHS combat shirt sleeves

Additional options available:

$15 – make and add combat elbow pad pockets

$45 – genuine CP combat elbow pad set

$12 – make arm pockets/velcro CP-G3 shape

$8 – make arm pockets/velcro CP-AC shape

$5 – install eyeglass/sunglass slot to right or left arm pocket flap (per CP type)

* add $3 if you want this option added to both arm pocket flaps

$6 – install pen/pen light tube to side of right or left arm pocket (per CP type)

* add $4 of you want this option added to both arm pockets

$8 – make and install velcro wrist cuff adjusters

–

$29 – Basic RAID shirt conversion

* field shirt supplied by person ordering

Includes small upper chest pockets moved to each shoulder, large lower pockets moved up and attached to where the small chest pockets were located at any angle that the customer chooses..ie, diagonal, horizontal with pocket openings facing inward or outward…etc for better accessibility when donning a chest rig or plate carrier..etc. All buttons remain on shirt/jacket.

Add $8 – Removal of buttons and installation of color coordinated velcro hook and loop strips at all pocket closures on RAID shirt/uniform jacket (if customer supplies velcro)

(* Add $12, instead of $8.00, if I supply velcro)

Add $5.00 – Installation of loop velcro on both shoulder pockets and both shoulder pocket flaps…concealable IR tab installation on shoulder pocket velcro is included (customer supplies velcro & IR tabs)

(* Add $10.00, instead of $5.00, if I supply velcro)

Add $2.50 – Installation of loop velcro at end of each shoulder (just above shoulder pocket flaps, between the flap and the end of the shoulders…this is considered the “old school” mod (customer supplies velcro)

(* Add $5.00, instead of $2.50, if I supply velcro)

Add $2.50 for velcro loop name-tape strip installation (customer supplies velcro)

(* Add $5.00, instead of $2.50, if I supply velcro)

* Military or LE field shirts/pants or other type of tactical pants or shirts may be obtained from me at the best price I can get them for (used or new) with usually little to no profit for me, for the searching of the item/items and obtaining of the items…I will do this for all customers at the cheapest available price , via my sources

* adtactical@yahoo.com

Demo photo showing FCHP conversion to Crye Gen 2 Field pants w/Crye AirFlex knee pads (further mods..the E-FCHP BATTLE conversion, will be added to these pants later on) 09/27/11

Demo photo showing FCHP conversion to Crye Gen 2 Field pants w/Crye AirFlex knee pads 09/27/11

Sample photo #2 A-TACS FCHP & FCHS combat shirt conversions with MJK/khaki colored EI MAR-CIRAS kit on

Sample photo #3 A-TACS FCHP & FCHS conversion with coyote EI Land CIRAS kit on

Woodland RAID uniform conversion with a mix of DBT/Paraclete/SDS Ranger Green, Smoke Green & dark OD kit on 09-20-11

Woodland RAID uniform conversion with a mix of DBT/Paraclete/SDS Ranger Green, Smoke Green & dark OD kit on 09-22-11

Woodland RAID uniform conversion with Ranger Green, Soke Green & dark OD kit on 09-22-11

FCHP pant & RAID shirt conversion on woodland camo uniform with coyote EI Land CIRAS and gear on – 08/08/11

FCHP pant & RAID shirt conversion on woodland camo uniform displaying pocket relocations and velcro add-on’s…with coyote EI Land CIRAS and gear on – 08/07/11

FCHP conversion on woodland camo pants with Crye Gen 1 combat knee pads 08/08/11

FCHP pants conversion and RAID shirt conversion together with a random coyote CIRAS kit on..etc

E-FCHP PIE SLICER (SWAT/SRT/HRT conversion) * details and pricing for the E-FCHP PIE SLICER conversion are not available yet…contact me about this if you are interested E-FCHP BATTLE (FCHP version 3) conversion The E-FCHP BATTLE and E-FCHP RECON/BATTLE pants are an alternative option over my original FCHP PMC (version 1) pants conversions. The E-FCHP BATTLE and E-FCHP RECON/BATTLE pants conversions will be the best answer to creating pants that have the the extra features..etc that allow the user to adjust the pants according to their needs. Features of this conversion are similar to pants that are currently sold at expensive prices in the retail market. There may be slight variances with each persons pants, due to the particular design of the pants that are going to be worked on… however, in general, each E-FCHP BATTLE and E-FCHP RECON/BATTLE pants conversion will have the following features that are listed below:

The ability to use name brand or functional replica (off-brand) “combat” knee pads that are used the same way as ones utilized in mainstream retail combat pants
No more having to deal with the hassle of sloppy uncomfortable knee pad straps that come loose, dangle, or get in the way during operations
If the pants have lower calf pockets that are not being used, the user can now use those pockets more effectively because they can be re-located to the center upper pant leg area (pockets can be off-set left or right based on the customers request)
Color-coordinating velcro cinch straps will be added the outer sides of each pant leg… at the sides of each knee pad pocket to help with adjustment/retention of the combat knee pads and at each ankle
Reinforced stitching at knee hole openings and upper pant leg pockets

Combat knee pad pockets with double stitch outlines
Reinforced loop velcro knee pad hole edges
Internal knee pad height adjusters (1″ matching nylon webbing/1″ matching loop-locks)
Folded and angled pocket flaps
Outer mid-pant leg velcro adjustment straps
Ankle pant leg velcro adjustment straps
Calf pocket relocation to front of pant legs, just above top of knee pad pockets,if pants have existing lower calf pockets
All necessary matching velcro included

* 2 front D-ring loops added to front of pants waist-line using 1″ matching nylon webbing at base of the two front belt loops (CUSTOMER MUST REQUEST THIS OPTION)

E-FCHP pants conversion sample (Propper twill pants 03/06/12)

E-FCHP pants conversion sample (Propper twill pants…yellow outline is chalk used for marking sew lines…it washes away after pants are washed/dry cleaned..etc)

E-FCHP pants conversion sample (Propper twill pants…mid-pant leg straps are angled slightly downward to keep the thickness of the velcro clear of the bend/crease area when user goes to a squat or kneel position 03/06/12)

E-FCHP pants conversion sample (Propper twill pants03/06/12)

E-FCHP pants conversion sample (Propper twill pants)

E-FCHP pants conversion sample (Propper multicam rip-stop pants 03/01/12)

— E-FCHP RECON/BATTLE (FCHP version 2) conversion The E-FCHP pants are an alternative option over my original FCHP pant conversion. The features of the E-FCHP pant are posted with each of the photos below. The E-FCHP pants conversion will be the best answer to creating pants that have all of the extra features..etc that allow the user to adjust the pants according to their needs. Features of this conversion are similar to the “FCHP” pants conversion, but have internal knee pad height adjusters located inside the upper pants hand pockets. There may be slight variances with each persons pants, due to the particular design of the pants that are going to be worked on… however, in general, each E-FCHP pants will have the following features:

The ability to use name brand or functional replica (off-brand) “combat” knee pads that are used the same way as ones utilized in mainstream retail combat pants
No more having to deal with the hassle of sloppy uncomfortable knee pad straps that come loose, dangle, or get in the way during operations
If the pants have lower calf pockets that are not being used, the user can now use those pockets more effectively because they can be re-located to the center upper pant leg area (pockets can be off-set left or right based on the customers request
Reinforced stitching at knee hole openings

Combat knee pad pockets with double stitch outlines and edge guards
Reinforced loop velcro knee pad hole edges
Internal knee pad height adjusters (1″ matching nylon webbing/1″ matching loop-locks)
Outer mid-pant leg velcro adjustment straps
Ankle pant leg velcro adjustment straps
Calf pocket relocation to front of pant legs, just above top of knee pad pockets, if pants have existing lower calf pockets
All necessary matching velcro included

E-FCHP conversion – Propper woodland camo pants along with Tru-Spec woodland camo shirt and XGO lightweight base shirt as donor shirt for FCHS combat shirt conversion 05/08/12

E-FCHP conversion – Propper woodland camo pants 05/08/12

E-FCHP conversion – Propper woodland camo uniform 05/08/12

E-FCHP conversion to Propper woodland camo pants 05/08/12

E-FCHP conversion to Propper woodland camo pants 05/08/12)

E-FCHP conversion to Propper woodland camo pants 05/08/12

E-FCHP conversion to Propper woodland camo pants 05/08/12 — FCHP PMC (FCHP version 1) conversion —

FCHP conversion bulk order – two Tru_spec woodland pants, two Tru-Spec multicam pants 06/25/12

FCHP conversion bulk order – two Tru_spec woodland pants, two Tru-Spec multicam pants with added options…lower leg openings 06/25/12

—

FCHP PMC conversion to DCU rip-stop pants (06/10/12)

FCHP PMC conversion to DCU rip-stop pants (06/11/12)

—

FCHP PMC conversion to woodland issue Propper 50% cotton/50% nylon Large/Regular pants – 06/07/12

—

FCHP PMC (FCHP version 1) pants conversions to new Tru-Spec rip-stop woodland pants on the left and new Propper rip-stop woodland pants on the right…both with green replica AirFlex combat knee pads (05/31/12)

FCHP PMC (FCHP version 1) pants conversions to Tru-Spec rip-stop woodland pants on the left and Propper rip-stop woodland pants on the right with replica OD AirFlex combat knee pads (05/31/12)

FCHP PMC (FCHP version 1) pants conversion to Tru-Spec rip-stop woodland pants (05/31/12)

FCHP PMC (FCHP version 1) pants conversions to Tru-Spec rip-stop woodland pants

FCHP PMC (FCHP version 1) pants conversions to Propper rip-stop woodland pants (05/31/12)

—

FCHP conversion – Desert Tigerstripe 04/2012

FCHP conversion – Desert Tigerstripe

FCHP conversion to Desert Tigerstripe pants with FCHS conversion to DTS field shirt using a tan 5.11 compression shirt 04/2012

FCHS conversion to woodland camo pants 04/2012

FCHS conversion to woodland camo pants with FCHS conversion to woodland camo shirt using a coyote 5.11 compression shirt 04/2012

FCHS conversion to woodland camo pants 04/2012

Basic FCHP conversion to two pairs of Propper rip-stop DCU pants (addition of velcro ankle straps and one back pocket modified to velcro closure for quick access 03/15/12

Basic FCHP conversion to two pairs of Propper rip-stop DCU pants (addition of replica AirFlex knee pads, velcro ankle straps and one back pocket modified to velcro closure for quick access 03/15/12)

Basic FCHP conversion to two pairs of Propper rip-stop DCU pants (addition of replica AirFlex knee pads, velcro ankle straps and one back pocket modified to velcro closure for quick access * a rear quick access pocket is made if it is requested…person must state which side they want changed to quick access type pocket* 03/15/12)

Basic FCHP conversion to two pairs of Propper rip-stop DCU pants (addition of replica AirFlex knee pads, velcro ankle straps and one back pocket modified to velcro closure for quick access 03/15/12)

* FCHP (version 1.5) conversion to DCU rip-stop pants 12/21/11FCHP

FCHP (version 1.5) conversion to DCU rip-stop pants 12/21/11FCHP

Customized/Variation FCHP conversion to M81 rip-stop pants with addition of OD green velcro closures – 11/2011

Customized/Variation FCHP conversion to M81 rip-stop pants 11/2011

—

A-TACS pants FCHP conversion shown with A-TACS FCHS shirt conversion 07/25/11

A-TACS pants FCHP conversion w/khaki/tan combat knee pads 07/25/11

—

Tru-Spec Rip-Stop 10-Pocket Multicam Pants with FCHP conversion using khaki color thread & khaki velcro (tan replica combat knee pads and calf pocekt re-location to upper front of legs) 07/28/11

Tru-Spec Rip-Stop 10-Pocket Multicam Pants with FCHP conversion using khaki color thread 07/28/11

—

FCHP conversion on isuue ACU pants (larger leg cinch straps, custom ankle cinch straps and velcro, calf pockets re-located to upper front legs and foliage color velcro loop for the knee hole edge guards 08/02/11)

FCHP conversion to ACU pants (larger leg cinch straps added and color-coordinated ankle cinch straps)

FCHP conversion on isuue ACU pants (shown with custom made ankle cinch straps 08/02/11)

FCHP conversion on isuue ACU pants (showing custom made ankle cinch straps 08/02/11)

—

FCHP conversion for Propper Multicam field pants with Crye AirFlex combat knee pads 08/2011

—

M81 woodies with the FCHP conversion and OD velcro cinch strap added to sides of knee areas 05/17/11

FCHP conversion & cinch strap add-ons on woodland camo (M81) pants 05/16/11

FCHP conversion woodland camo (M81) pants shown with cinch strap add-on 05/17/11

—

FCHP conversion done to CADPAT pants – calf pockets removed and relocated to upper legs and cinch straps added to each leg 07/18/11

FCHP conversion done to CADPAT pants 07/18/11

—

FCHP conversion (Rothco Olive Drab BDU Pants) – sample

—

: Complete custom FCHP conversion to Swiss Alpen pants with PALS webbing add-on, velcro slant pocket modification & Carabiner/chem light holder addition 03/08/11

Swiss Alpen pants with Pre-MSA Paraclete GP pouch on the PALS webbing

Swiss Alpenflage pants photo shows details of my “Quick-Draw” magazine pocket modification

FCHP conversion to DCU pants (11/2012)

: Swiss Alpenflage pants with my FCHP conversion, “quick-draw” pistol and rifle magazine pocket/retainer modification and chem stick pocket

Swiss Alpenflage – “Special Request” with my FCHP mod and custom “quick-draw” magazine pocket modifications

ABU uniform with CCT kit and my FCHP conversion done to the pants (photo courtesy of customer displaying CCT load-out along with the FCHP modified pants 04/23/11)

Photo courtesy of customer with his CCT load-out showing my FCHP conversion done to his ABU pants

: ABU Pants with a customized FCHP conversion… pocket relocations with velcro added to pocket closures 02/15/11

Crye Precision FROG uniform pant with my FCHP Field/Combat Hybrid Pant conversion… reinforced combat type knee pad insert/openings , khaki colored combat knee pads and relocation of calf pockets to upper leg area (01/22/11) Crye Precision FROG uniform pants showing the velcro knee pad cinch straps and adjustment at rear of leg panels (cinch straps are an available add-on upon the customers request) Crye Precision FROG uniform shirt with added Velcro Brand 4″ khaki/tan loop velcro (same exact velcro I used on the FROG pant straps in the above photo SAMPLE 3…once again, the coloring of the loop velcro is off because of my camera settings…I’ll adjust the settings later and post a better picture) Note: * The 2″ X 2″ khaki/tan loop velcro that are on the upper arm pocket flaps are already on the FROG uniforms when they are purchased. They are an exact match and brand of velcro that I used when I added velcro to the arm pockets. The velcro already on the FROG desert MARPAT uniforms is Velcro Brand velcro and I used khaki/tan Velcro Brand velcro, as well, for the 4″ pocket velcro addition. The Crye Precision FROG uniforms are already made with khaki/tan velcro instead of the usual coyote tan color that is usually what is seen on USMC’s choice colors. Crye Gen 2 uniform Field Pant in multicam shown with my FCHP Field/Combat Hybrid Pant modification…with combat type knee pad insert openings and khaki colored combat knee pads inserted (01/02/11) Crye Gen 1 Field Pant in multicam shown with my FCHP Field/Combat Hybrid Pant modification… with combat type knee pad insert openings, without combat knee pads Crye Precision Gen 1 and Gen 2 Field Pant in multicam shown side by side with the FCHP knee pad insert modification…with and without combat knee pads (Gen 1’s on the left have been washed a few times and hung dry and have faded a bit….the Gen 2’s are new and haven’t been used yet…both pants are the rip-stop material versions) — FCHS (Field/Combat Hybrid Shirt) conversions

FCHS conversions on Tru-spec woodland camo field shirts using OD green XGO mid-weight base layer shirt and lightweight Dri-Fire base layer shirt 06/25/12

FCHS conversions on Tru-spec woodland camo field shirts using XGO mid-weight base layer shirt and lightweight Dri-Fire base layer shirt 06/25/12

FCHS conversions on Tru-spec woodland camo field shirts using XGO mid-weight base layer shirt (at left) and lightweight Dri-Fire base layer shirt (at right) 06/25/12

FCHS conversions on Tru-spec woodland camo field shirts using a Dri-Fire light weight base layer shirt 06/25/12

FCHS conversions on Tru-spec woodland camo field shirts using a lightweight XGO base layer shirt 06/25/12

— Custom FCHS conversion to a DCU 50% cotton/50% nylon shirt using a sand colored XGO mid-weight shirt (06/04/12)

Custom FCHS combat shirt conversion to DCU 50% cotton/50% nylon shirt (06/04/12)

Reinforced collar and zipper outline – Custom FCHS combat shirt conversion to DCU 50% cotton/50% nylon shirt (06/04/12)

Custom FCHS combat shirt conversion to DCU 50% cotton/50% nylon shirt (06/04/12)

Reinforced collar and zipper outline – Custom FCHS combat shirt conversion to DCU 50% cotton/50% nylon shirt (06/04/12)

FCHS conversion to desert tiger-stripe field shirt (size small 5.11 sand colored compression shirt was used for the FCHS conversion 03/27/12)

FCHS conversion on A-TACS shirt 07/24/11 (center document pocket added to center chest)

FCHS conversion on A-TACS shirt 07/24/11

FCHS conversion on CADPAT shirt 07/22/11 (Potomac Field Gear T-shirt replaced the torso section and arm pits of the CADPAT shirt… reinforced collar with zipper installation)

FCHS conversion on CADPAT shirt 07/22/11

RAID shirts and pants samples from recent and prior customer orders:

Woodland camo RAID shirt with custom features added to it (coyote velcro, USMC FROG velcro placement on shoulder pockets, mandarin collar, reinforced flap closure, intermittent velcro between button closures at center closure, replaced wrist buttons with velcro closures, replace buttons on chest pockets with velcro, angled chest pockets and hemmed shirt from medium/regular to medium/short) 04/09/12

Woodland camo RAID shirt with custom features added to it 04/09/12

—

Woodland RAID uniform conversion pants and shirt (09/22/11)

Woodland RAID uniform shirt conversion showing addition of 1″ IR sqaure holder at rear of collar, above seam-line 09-22-11

Woodland shirt RAID conversion showing aded spaced velcro closures at sleeve cuffs (buttons were retained per customers request) 09-22-11

Woodland RAID uniform shirt conversion showing military grade OD colored velcro adjustable sleeve cuff 09-22-11

Woodland RAID uniform shirt conversion showing military grade OD colored velcro 09-22-11

Woodland RAID uniform shirt conversion showing military grade OD colored velcro chest pockets with retained buttons per customers request 09-22-11

WBP addition (this mod is an OPSEC and/or private modification…e-mail me about this modification if you don’t already know what it is and what it’s for)

Woodland basic RAID pants conversion showing rear velcro pocket closures with buttons retained per customers request 09-22-11

Woodland basic RAID pants conversion showing rear velcro pocket closures 09-22-11

Woodland basic RAID pants conversion showing cargo velcro pocket closures w/buttons retained 09-22-11

RAID shirt conversion (alternate RAID version) for Propper multicam field shirt 08/2012

RAID shirt conversion (alternate RAID version) w/double pen pocket add-on for Propper multicam field shirt 08/2012

RAID shirt conversion(alternate RAID version) for Propper multicam field shirt 08/2012

RAID woodland camo (M81) shirt conversion (alternate RAID version) with requested pocket re-location/diagonally placed pockets & addition of OD velcro 05/16/11

RAID woodland camo (M81) conversion (alternate RAID version) with pocket and velcro installation 05/16/11

RAID woodland camo (M81) shirt conversion with slanted, outward facing pocket installation and velcro name-tape strips 05/16/11

RAID woodland camo (M81) shirt/jacket and pants shown together (FCHP conversion & RAID conversion) 05/16/11

Rothco brand OD Field Shirt converted to a RAID shirt (note: this uniform was a size large and as you can see, it is way too big for me to wear…this was a customers uniform that I put on to use as a sample to display my services)

Rothco RAID shirt conversion

Rothco brand Field Shirt converted to a custom RAID shirt…remove and relocate large bottom pockets up to chest area and attach diagonally…remove upper chest pockets and reattach them to both arems diagonally…add 1″ X 6″ nametape velcro…add 2″ X 4″ shoulder velcro…add 2″ X 2″ shoulder pocket flap velcro…add 4″ X 4″ shoulder pocket velcro)

FCHP conversion to Propper multicam field pants with Crye Gen 1 pads 08/2011

FCHP conversion to Propper multicam field pants with Crye AirFlex pads 08/2011

FCHP conversion to DCU field pants 08/2011

A-TACS pants FCHP conversion 07/25/11

FCHP conversion (M81 woodland camo pants) – sample

FCHP conversion done to CADPAT pants 07/18/11

FCHP conversion (Swiss Alpen pants) – sample

FCHP conversion (Rothco Olive Drab pants) – sample

FCHP conversion (Crye Precision Gen 2 Field Pants) – sample

FCHP conversion (Crye Precision Desert MARPAT FROG Pants) – sample

FCHS – sample photos

FCHS/Combat Option A conversion to a new Propper multicam field shirt using a smoke green based base * customer requested more of a green based conversion per his darker woodland environment (Pacific Northwest) shirt 10/03/11